CYABOND SEALANT PRODUCT APPLICATION EQUIPMENT

Industrial high-volume ammunition sealing process requires the incorporation of very specific components and technologies to ensure the success of the process. Moreover, the combination of these technologies and the ability to achieve and even exceed the basic criteria of the sealing production process is a sign of successful, high-volume, high-speed sealing. In order for high volume mass sealing to be successful, the following criteria must be met;

Successful sealing of ammunition The ability to seal large quantities of ammunition The ability to ensure sealing in different caliber ammunition. The ability to perform quality control on the munitions sealed Easy maintenance, repair.

High-speed ammunition conveying system, U.V. ray curing station, and quality control station with purple U.V. light makes this equipment a modern machine which professionally performs the sealing process of ammunition.

CYABOND SEALANT PRODUCT APPLICATION EQUIPMENT

It applies the sealant product simultaneously on the back side and core-case junction with micro-level precision in mass production. It is designed to seal all gun and rifle bullets up to 50 calibers.

pplies ammunition sealant with precision micro-jets, ensuring consistent and precise fluid control without contacting the ammunition. Has the capacity to seal 300 9mm pistol rounds per minute Cures the sealant products instantly thanks to LED U.V. lights All settings can be done with precision from the touch-operated control panel. The system is cleaned in less than 5 minutes.

Identifies and rejects non-standard ammunition with optical cameras in the system. Optical cameras are used to check that sealant is applied correctly on the ammunition. The ammunition detected to be faulty are identified and rejected.

SEALING MACHINE SM120

This machine is used forsealing primer seams and case mouths. After loading operation cartridges are transported to the conveyor of the sealing machine by a feeding elevator. Both primer seam and case mouth a red ispensed consecutively. In the final stage cartridges are exposed to UV light to be dried.